 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Ordering number:ENN1036B PNP/NPN Epitaxial Planar Silicon Darlington Transistors 2SB883/2SD1193 Driver Applications Applications * Motor drivers, printer hammer drivers, relay drivers, voltage regulator control. Package Dimensions unit:mm 2022A [2SB883/2SD1193] 15.6 14.0 2.6 3.2 3.5 4.8 Features * High DC current gain. * High current capacity and wide ASO. * Low saturation voltage. 2.0 1.6 2.0 20.0 0.6 1.0 1 0.6 2 3 1.3 1.2 15.0 20.0 ( ) : 2SB883 Specifications Absolute Maximum Ratings at Ta = 25C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP PC Tj Tstg Tc=25C 5.45 5.45 1 : Base 2 : Collector 3 : Emitter SANYO : TO-3PB Conditions 1.4 Ratings (-)70 (-)60 (-)6 (-)15 (-)20 70 150 -55 to +150 Unit V V V A A W C C Electrical Characteristics at Ta = 25C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Symbol ICBO IEBO hFE fT VCE(sat) VCB=(-)40V, IE=0 VEB=(-)5V, IC=0 VCE=(-)2V, IC=(-)7A VCE=(-)5V, IC=(-)7A IC=(-)7A, IB=(-)14mA 2000 5000 20 0.9 (-)1.0 (-)2.0 (-)70 (-)60 (-)1.5 MHz V V V V V Conditions Ratings min typ max (-)0.1 (-)3 Unit mA mA VBE(sat) IC=(-)7A, IB=(-)14mA V(BR)CBO IC=(-)5mA, IE=0 V(BR)CEO IC=(-)50mA, RBE= Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN D1002AS (KT)/91098HA (KT)/10996TS (KOTO) 8-4525/4027KI/D222KI No.1036-1/4 2SB883/2SD1193 Electrical Connection C C B 6k 200 B 6k 200 2SB883 E 2SD1193 E --20 IC -- VCE From top --10mA --9mA --8mA --7mA --6mA --5mA --4mA 2SB883 20 IC -- VCE 2SD1193 From top 10mA 9mA 8mA 7mA 6mA Collector Current, IC - A Collector Current, IC - A --16 16 5mA 4mA 3mA --12 12 --3mA --2mA --8 8 --4 4 0 0 --1 --2 --3 IB=0 --4 --5 ITR08563 0 0 1 2 IB=0 3 4 5 ITR08564 Collector-to-Emitter Voltage, VCE - V --8 --7 Collector-to-Emitter Voltage, VCE - V 10 IC -- VCE 2SB883 IC -- VCE 2SD1193 Collector Current, IC - A --6 --5 --4 --3 --2 --1 0 0 --1 --2 --1.0mA --0.9mA --0.8mA --0.7mA --0.6mA Collector Current, IC - A 8 6 1.1mA 1.0mA 0.9mA 0.8mA 0.7mA 0.6mA --0.5mA 4 0.5mA 0.4mA --0.4mA --0.3mA IB=0 --3 --4 --5 ITR08565 2 0.3mA 0 0 1 2 3 IB=0 4 5 ITR08566 Collector-to-Emitter Voltage, VCE - V --20 Collector-to-Emitter Voltage, VCE - V 20 IC -- VBE 2SB883 VCE= --2V Collector Current, IC - A IC -- VBE 2SD1193 VCE=2V --16 16 Collector Current, IC - A --12 12 --8 8 --4 4 0 --0.6 --1.0 --1.4 --1.8 --2.2 --2.6 ITR08567 0 0.6 1.0 1.4 1.8 2.2 2.6 ITR08568 Base-to-Emitter Voltage, VBE - V Base-to-Emitter Voltage, VBE - V No.1036-2/4 2SB883/2SD1193 3 2 10000 7 5 3 2 1000 7 5 3 2 100 5 7 --0.1 2 3 5 hFE -- IC 2SB883 VCE= --2V DC Current Gain, hFE 3 2 10000 7 5 3 2 1000 7 5 3 2 100 hFE -- IC 2SD1193 VCE=2V DC Current Gain, hFE 1 Ta= C 20 25 C = Ta 12 0 C C 0 --4 C C --40 25 Collector Current, IC - A 7 --1.0 2 3 5 7 --10 2 3 5 7 0.1 2 3 5 ITR08569 100 7 5 Collector Current, IC - A 7 1.0 2 3 5 7 2 10 ITR08570 --100 7 5 3 2 --10 7 5 3 2 VCE(sat) -- IC 2SB883 IC / IB=500 VCE(sat) -- IC 2SD1193 IC / IB=500 Collector-to-Emitter Saturation Voltage, VCE (sat) - V Collector-to-Emitter Saturation Voltage, VCE (sat) - V 3 2 10 7 5 3 2 1.0 7 5 3 25C --1.0 7 5 3 --0.1 2 Ta= --40C 120C 3 5 7 --1.0 2 3 5 7 --10 2 ITR08571 25C 120C 5 7 0.1 2 3 5 Ta= --40C 7 1.0 2 3 5 Collector Current, IC - A --100 7 5 Collector Current, IC - A 100 7 10 2 ITR08572 VBE(sat) -- IC 2SB883 IC / IB=500 VBE(sat) -- IC 2SD1193 IC / IB=500 7 5 Base-to-Emitter Saturation Voltage, VBE (sat) - V Base-to-Emitter Saturation Voltage, VBE (sat) - V 3 2 --10 7 5 3 2 --1.0 7 5 3 --0.1 2 3 5 7 --1.0 2 3 5 7 2 --10 ITR08573 3 2 10 7 5 3 2 Ta= --40C 25C 120C Ta= --40C 25C 1.0 7 5 3 5 7 0.1 2 3 5 7 120C 2 3 5 7 2 10 ITR08574 Collector Current, IC - A 3 2 --10 Collector Current, IC - A 3 2 10 1.0 ASO ICP=-20A IC=-16A Collector Current, IC - A 2SB883 ASO ICP=20A IC=16A 10 m 2SD1193 Collector Current, IC - A 5 3 2 --1.0 5 3 2 --0.1 5 3 2 2 1m s 10 m s D 5 3 2 1.0 5 3 2 0.1 C op D s 1m s C er at op io er 10 n at 0m 10 0m s io s n Tc=25C 1ms to 100ms : single pulse 3 5 7 5 3 2 2 3 5 7 --100 ITR08575 2 Tc=25C 1ms to 100ms : single pulse 3 5 7 Collector-to-Emitter Voltage, VCE - V --10 Collector-to-Emitter Voltage, VCE - V 10 2 3 5 7 100 ITR08576 No.1036-3/4 2SB883/2SD1193 80 70 PC -- Tc Collector Dissipation, PC - W 60 50 40 30 20 10 0 0 20 40 60 80 100 120 140 160 Case Temperature, Tc - C ITR08577 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of December, 2002. Specifications and information herein are subject to change without notice. PS No.1036-4/4 |
Price & Availability of 2SD1193
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |